METAL FABRICATION
Made-to-drawing metal fabrication
Structures, frames and components in metal fabrication, assembled and tested to the supplied specification, for machines and industrial plants.
MATERIALS
SECTORS SERVED
Made-to-drawing metal fabrication involves coordinating several stages — cutting, welding, treatment, assembly — often handled by different operators: we manage that coordination, so you receive a structure that's already tested and ready to install.
PROCESSES
What we machine
Cutting & bending
Certified welding
Assembly & testing
Painting & surface treatment
PRODUCTION CAPACITY
Machining range
Indicative technical data: feasibility is always confirmed against the specific drawing.
- OVERALL RANGE
- 0.6 to 30 mm
- 65-70% OF WORK
- up to 3 mm
- 85% OF WORK
- up to 6 mm
- BEYOND THAT
- heavier thicknesses also available, no particular limitations
Note: the company specialises in thin/medium-gauge work, but is fully equipped for heavier thicknesses too.
Laser cutting — sheet & stainless
| Max length | 6 metres |
| Thickness | 0.6 – 30 mm (see overall range) |
Laser tube cutting
| Round tube | up to Ø 240 mm |
| Square tube | up to 200 mm |
| Max length | 6 metres |
| Materials | Carbon steel, stainless, aluminium, copper |
| Thickness | up to 8-10 mm or more (case by case) |
For 45° cuts the effective thickness to manage increases significantly: feasibility is always assessed against the specific cut required.
Panel bender
| Max length | 3000 mm |
| Max height | 220 mm |
| Thickness | 0.6 to 3 mm |
Weight & other dimensions
| Single part weight | manageable up to < 500 kg |
| Above 500 kg | assessed case by case |
MATERIALS WE MACHINE
Plastic materials are generally machined starting from sheet stock. ISO 9001 certified — details available on request.
Have a drawing in this category?
Send it over for a technical assessment and an indicative lead time.